Catalog # 1030C12

Pitch Diameter	Maximum Bore	Stock Bore	Hub Diameter	Length Through Bore	Sprocket Weight
11.881	3.750"	1.687"	5.50"	4.500"	60.00lbs

Type C Steel Sprockets for No. 1030 Mill Chain

3.075″ Chain Pitch – 1 1/4″ Barrel Diameter – 1 1/4″ Sprocket Face Width

Stock bores are nominal and must be re-bored even though bore desired is

same size as listed stock bore.

Listed maximum bore is with set screw at angle to keyway.

Stock sprockets above may also be used with the following chains or others having the same pitch, barrel diameter and width,

however all may not clear standard hub on 6 and 7 tooth sprockets due to variations in side bars.

Chain Belt – Champion No. 3, 1030DW, 1033, R1033, R1035, 1037, 1539

Jeffrey – 3DD, SS39, IS1030, IS1031, IS1032, IS1037, IS3075

Link Belt – AP13 Redhead, SS39, SS39+, SS40, SS40 Hyper, SS40+, LXS1031, LXS1032, LXS1032M, SS1033, LXS3075M

Moline – MXS40, MXS1031, MXS3075

Union – 119J, 119R, 119RX, US1031, US1032, 1190R, 1190R3, 1190RX, 1190SX, 1190SXX

Webster – SS54+, S554

Sprockets of other face widths or tooth numbers as well as those for practically any other chain are readily

available and all can be furnished with hardened teeth. Please inquire for information and delivery.

Thank you