Sprockets
Gears
LSB Sprockets
Bushings
Collars
Other
These are stock parts — We also have Made-to-Order parts or Contact Us
| Minimum Size Sprocket | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Maximum Bore | Hub Diameter | Length | 35 | 41 | 40 | 50 | 60 | 80 | 100 | 120 | 140 | 160 | 180 | 200 | 240 | Sprocket Weight | |
| 3.250" | 6.50" | 3.750" | 33.000" | 26.000" | 21.000" | 18.000" | 16.000" | 15.000" | 14.000" | 13.000" | 11.000" | 30.00lbs | |||||
Split hubs are round and fully machined. They do not have dangerous projecting bolts or ears. They are drilled and tapped for high strength socket head cap screws and are welded to each side of a Type A sprocket, forming a unit similar in appearance to a Type C sprocket. Fully split sprockets cost more to produce than solid, but may provide significant cost savings by simplifying installation and removal.
Hub size selected should be proportionate to the pitch and diameter of the sprocket as well as adequate for the bore required. Very large or heavy pitch sprockets may be tack welded near the rim after installing on the shaft for extra strength if desired, or we can install steel straps at an additional charge.
Add listed hub length/weight to Type A sprocket for total length/weight of assembled sprocket.
If standard sizes do not meet requirements, please inquire. Special sprockets can be made to accommodate larger bores, smaller sizes than shown, multiple strand sprockets or for chains other than those listed.
